Page 2 of 2
Re: 2.2 PCB w/ ABA swap compatibility
Posted:
Thu Mar 11, 2010 10:29 am
by prof315
Ok I have posted an msq in the MAPS subforum for an ABA running MS2/extra v2.10d. It is set up for GM CLT and IAT sensors and 24lb/hr injectors, but should get just about any N/A ABA running.
Re: 2.2 PCB w/ ABA swap compatibility
Posted:
Sun Mar 14, 2010 12:13 am
by ojeeztutone
awesome thanks a ton! Now however i have no communication with the ECU when i try to run megatune. I have power and ground to the computer wires but i cant find it on any com port.
Re: 2.2 PCB w/ ABA swap compatibility
Posted:
Mon Mar 15, 2010 4:26 am
by prof315
You have to tell it which com port you are using. Are you using a real DB9 com port on your computer or a USB port and Adapter?
Re: 2.2 PCB w/ ABA swap compatibility
Posted:
Sat May 29, 2010 7:58 pm
by ojeeztutone
How should i be running my wires to the board from the crank sensor?? i am currently running, red to signal, green to shield and black to ground. I am getting no crank signal.