2.2 PCB w/ ABA swap compatibility

Post here for the brain!

Re: 2.2 PCB w/ ABA swap compatibility

Postby prof315 » Thu Mar 11, 2010 10:29 am

Ok I have posted an msq in the MAPS subforum for an ABA running MS2/extra v2.10d. It is set up for GM CLT and IAT sensors and 24lb/hr injectors, but should get just about any N/A ABA running.
User avatar
prof315
 
Posts: 59
Joined: Tue Dec 08, 2009 7:33 am
Location: Melbourne, FL

Re: 2.2 PCB w/ ABA swap compatibility

Postby ojeeztutone » Sun Mar 14, 2010 12:13 am

awesome thanks a ton! Now however i have no communication with the ECU when i try to run megatune. I have power and ground to the computer wires but i cant find it on any com port.
Random avatar
ojeeztutone
 
Posts: 8
Joined: Tue Feb 02, 2010 10:21 pm

Re: 2.2 PCB w/ ABA swap compatibility

Postby prof315 » Mon Mar 15, 2010 4:26 am

You have to tell it which com port you are using. Are you using a real DB9 com port on your computer or a USB port and Adapter?
User avatar
prof315
 
Posts: 59
Joined: Tue Dec 08, 2009 7:33 am
Location: Melbourne, FL

Re: 2.2 PCB w/ ABA swap compatibility

Postby ojeeztutone » Sat May 29, 2010 7:58 pm

How should i be running my wires to the board from the crank sensor?? i am currently running, red to signal, green to shield and black to ground. I am getting no crank signal.
Random avatar
ojeeztutone
 
Posts: 8
Joined: Tue Feb 02, 2010 10:21 pm

Previous

Return to Megasquirt computer

cron
Hosted by Freeforum.ca, get your free forum now! TOS | Support Forums | Report a violation
buying traffic website
MultiForums powered by echoPHP phpBB MultiForums