MK2 Golf 2.0 8v GTI

Step by step

MK2 Golf 2.0 8v GTI

Postby iZOTOPE » Tue Oct 19, 2010 1:46 am

My setup:
2.0 8v 116HP AGG engine
Megasquirt 2 with PCB v3
2.1.0p MS Extra Firmware
CIS Auxiliary air valve for idle, controlled by FIDLE output
Launch control and flat shift
ignition using mk3 2E dizzy and hall input, soon i'll convert to wasted spark...

now for some pictures from makeing the wiring loom and installing on the car
the ms2 ecu from diyautotune
ecu1.jpg

ecu4.jpg


old wiring loom from the car ... what a mess
instalatie masina2.jpg
Random avatar
iZOTOPE
 
Posts: 29
Joined: Tue Oct 19, 2010 1:32 am

Re: MK2 Golf 2.0 8v GTI

Postby iZOTOPE » Tue Oct 19, 2010 1:51 am

making the wiring loom for ms2:
instalatie ms2.jpg


the relays
relee2.jpg


testing ms2 ecu
test ecu pe comp.jpg
Random avatar
iZOTOPE
 
Posts: 29
Joined: Tue Oct 19, 2010 1:32 am

Re: MK2 Golf 2.0 8v GTI

Postby iZOTOPE » Tue Oct 19, 2010 1:55 am

after all the measurements were good, i mounted the loom and ecu on my car, it was straight forward, i've used stock coolant sensor, intake air temperature sensor and narrowband O2 sensor.
montare pe masina2.jpg

montare pe masina5.jpg

montare pe masina8.jpg
Random avatar
iZOTOPE
 
Posts: 29
Joined: Tue Oct 19, 2010 1:32 am

Re: MK2 Golf 2.0 8v GTI

Postby iZOTOPE » Tue Oct 19, 2010 2:10 am

after everything got in and tested again it was time for me to start the sleeper, some screenshots with the configuration of ms2 ecu:
generalsettings.JPG

ignitionoptions.JPG

sparksettings2.JPG
Random avatar
iZOTOPE
 
Posts: 29
Joined: Tue Oct 19, 2010 1:32 am

Re: MK2 Golf 2.0 8v GTI

Postby iZOTOPE » Tue Oct 19, 2010 2:19 am

engine constants, ve table and spark table:
engine_constants.JPG

ve_table.JPG

spark_advance.JPG
Random avatar
iZOTOPE
 
Posts: 29
Joined: Tue Oct 19, 2010 1:32 am

Re: MK2 Golf 2.0 8v GTI

Postby iZOTOPE » Tue Oct 19, 2010 2:20 am

ego control and afr table:
egocontrol.JPG
afr_table.JPG
Random avatar
iZOTOPE
 
Posts: 29
Joined: Tue Oct 19, 2010 1:32 am

Re: MK2 Golf 2.0 8v GTI

Postby iZOTOPE » Tue Oct 19, 2010 2:23 am

accel wizard, injector settings and overrun fuel cut settings:
accel_wizard.JPG

injectorparametres.JPG

overrunfuelcut.JPG
Random avatar
iZOTOPE
 
Posts: 29
Joined: Tue Oct 19, 2010 1:32 am

Re: MK2 Golf 2.0 8v GTI

Postby iZOTOPE » Tue Oct 19, 2010 2:27 am

then i made the low input circuit to use the launch control feature.
here are some photos with the pcb and the modifications needed to enable launch control.
lowinput.jpg
(10.81 KiB) Not downloaded yet

photo03267569379.jpg

photo03337657942.jpg
Random avatar
iZOTOPE
 
Posts: 29
Joined: Tue Oct 19, 2010 1:32 am

Re: MK2 Golf 2.0 8v GTI

Postby iZOTOPE » Tue Oct 19, 2010 2:31 am

more photos on launch control circuit:
photo03357690739.jpg

photo03367704774.jpg

photo03397733323.jpg
Random avatar
iZOTOPE
 
Posts: 29
Joined: Tue Oct 19, 2010 1:32 am

Re: MK2 Golf 2.0 8v GTI

Postby iZOTOPE » Tue Oct 19, 2010 2:34 am

the settings for launch control in megatune:
lc.JPG
Random avatar
iZOTOPE
 
Posts: 29
Joined: Tue Oct 19, 2010 1:32 am

Next

Return to Complete Installs

cron
Hosted by Freeforum.ca, get your free forum now! TOS | Support Forums | Report a violation
buying traffic website
MultiForums powered by echoPHP phpBB MultiForums